Interiors · Kitchens

Kitchen worktops: which stone, how it is measured, how to keep it

The worktop takes the hardest use in a kitchen: knives, hot pans, spills of lemon and fish sauce, several times a day. Choose wrongly and it stains within two years, cracks where you did not expect — and replacing a worktop means dismantling the run.

The four groups

Natural granite

  • Strengths: hard, good heat resistance, survives knife contact, sensible cost in common colours.
  • Weaknesses: it is porous, so oil and coloured liquids soak in and mark it, particularly in pale colours. It needs periodic sealing. Natural veining means every slab differs, so joints rarely read as continuous.
  • Suits: heavily used kitchens on a moderate budget, in darker colours.

Engineered quartz

  • Strengths: virtually non-porous, so it stains least of the four. Even colour and pattern, so joints read better. Good pale and white options.
  • Weaknesses: dearer than common granite. Sensitive to heat — a pan straight off the hob can discolour the resin, and that mark does not come out. Always use a trivet.
  • Suits: pale kitchens, households with children, anyone who wants low maintenance.

Solid surface (acrylic composite)

  • Strengths: joints can be made invisible, so long runs and curves read as one piece. Scratches can be sanded out — a real advantage.
  • Weaknesses: softer, scratches more readily, and the least heat resistant of the four.
  • Suits: bars, vanity tops, anywhere a seamless surface matters. Less often the main cooking run.

Marble

  • Strengths: the finest veining, the most luxurious appearance.
  • Weaknesses: soft, and readily etched by acid. Lemon, vinegar or a soft drink left for minutes etches the surface into a dull mark. That is not dirt — the stone itself has been eaten away, and wiping does nothing.
  • In our assessment: marble is beautiful but poorly suited to a working Vietnamese kitchen. Use it for a decorative top, a vanity, or an island that is not cooked on.

Quick comparison

MaterialStain resistanceHeatScratchSeamless joints
Natural graniteModerateGoodGoodDifficult
Engineered quartzVery goodModerateGoodFair
Solid surfaceGoodPoorModerateExcellent
MarblePoorGoodPoorDifficult

For a Vietnamese kitchen — frequent frying, lemon and fish sauce — engineered quartz or a darker granite are the two safe choices.

How the area is charged

Usually by the linear metre at a standard depth of around 60 cm, or by square metre. But the total is not only the flat surface, and this is where costs appear:

  • Upstand — the 5 – 10 cm strip against the wall that stops water reaching the joint. Charged separately by the metre.
  • Front drip edge — the raised lip stopping water running onto the doors.
  • Edge profile — a square edge is cheapest; bullnose, bevel or a doubled-up thicker edge all add.
  • Cut-outs — sink, hob, tap holes, worktop sockets, each priced individually.
  • Returned ends down the side of a run, where used.
For L and U shapes: ask how the corner overlap is counted — some suppliers charge the corner area twice, some once. The difference is small but worth knowing. More importantly, ask where the joints will fall — see below.

Why worktops crack

Almost never because the stone was weak. Usually one of three:

  1. A joint in the wrong place. The commonest cause. A joint must never sit over the sink or hob cut-out, the weakest point in the slab. It belongs mid-cabinet, where there is support beneath.
  2. Insufficient support. Stone overhanging too far past the carcass, or an unsupported span over a dishwasher with no cross rail.
  3. An out-of-true carcass. Stone laid on a run that is not flat carries load unevenly and cracks within months.

When ordering, ask directly: where will the joints fall, and is there a cross rail under the cut-outs?

Cleaning and keeping

Daily

A damp cloth and diluted washing-up liquid suits all four. Wipe spills immediately, especially fish sauce, lemon, vinegar, coffee and turmeric.

Stains on a pale worktop

  1. Bicarbonate of soda mixed to a paste, spread on the mark, covered with film and left overnight. Effective on oil drawn into natural stone.
  2. Washing-up liquid with hydrogen peroxide for tea, coffee and food colouring on engineered stone.
  3. A proprietary stone cleaner, in the correct formulation for natural or engineered stone.
Never use on a stone worktop: bleach, toilet cleaner, vinegar or lemon as a cleaning agent, wire wool or abrasive pads. They attack the surface or the sealer, and afterwards the stone soils faster than before because its protection has gone.

Sealing

Only natural stone needs it — every one to two years, or when water stops beading and starts spreading. Engineered quartz does not.

How Tropicity works

Our quotations separate the stone from the cabinetry, stating the material, edge profile, number of cut-outs and upstand, so you can see what the worktop actually costs within the kitchen price.

We also mark joint positions on the drawing rather than leaving them to the fitter on the day, because that is what decides whether a worktop cracks.

See cabinet materials, standard dimensions, or the interiors page.

Send your kitchen plan for an itemised quotation

Free preliminary estimate

Get our company profile and a budget range within 48 hours

Tell us where your project is and what you plan to build. A Tropicity engineer replies within one working day and arranges a site visit in Ho Chi Minh City and the southern provinces.

  • One contract, one estimate, one point of contact
  • A structural engineer visits your site
  • English-speaking contact; no marketing emails

Why the site address? Planning rules, building density and truck access change the price. Without the address an estimate is only a generic figure.

Please enter your name.
Please enter a valid email.
Please select a project type.
Please enter the project location.

Urgent: call +84 937 989 858

Zalo