Aluminium and glass

Casement, sliding, folding, arched: choosing a door type for each position

The type of door is a decision that is hard to revise. Once the aluminium is cut and the opening is built, changing how a door opens means starting again. This article goes through each type, where it belongs and where it is commonly chosen wrongly.

The types and where they belong

Casement

A hinged sash — the basic type, and the one that seals best.

Best for: entrances, bedroom windows, bathrooms, anything facing driving rain, anywhere that must resist wind and water.

Not for: positions with no room for the sash to swing — narrow balconies, tight corridors, anywhere obstructed behind the door.

Decide early: inward or outward opening, at drawing stage. Outward saves floor space but exposes the sash to weather; inward is easier to clean and lasts better but takes room indoors.

Awning

Hinged at the top, opening outwards a short distance.

Best for: bathroom and shower-room windows, high-level vents, any window that should stay open during rain.

An advantage often overlooked: it can be left open in rain without water entering, because the open sash shelters the gap it creates.

Sliding

Sashes run horizontally on tracks and take no space when open.

Best for: narrow balconies, garden doors, openings between a room and a terrace, wide openings.

Three things to know first:

  • A slider is never as weathertight as a casement — adjacent sashes always leave a gap.
  • A two-sash, two-track door opens only half the opening. More tracks, or a folding door, are needed for more.
  • The bottom track needs attention. Dust and grit collect in it and the rollers grow noisy and stiff. If a recessed track is not wanted, an upstand must be accepted — worth settling before the floor is laid.

Folding (bi-fold)

Sashes fold together and slide to one side, clearing almost the whole opening.

Best for: café and shop frontages, living rooms opening to a garden, anywhere the opening should read as fully clear.

The trade-off: many sashes mean many hinges and rollers, so the price is higher and the ironmongery must be good. This is the type where cheap hardware shows first.

Arched

Frames bent to follow an arched head.

Best for: neo-classical houses and villas with built arches.

Note: bending equipment and higher wastage make it dearer than straight work of the same area. More importantly, the built arch must be true. An accurately bent frame will still leave gaps in an uneven arch, so measure the opening again before ordering.

Louvre

Horizontal aluminium blades that shed rain while allowing air through.

Best for: plant rooms, screening condenser units, stores, stair vents — anywhere ventilation is needed without a view through.

A common domestic form is louvre below, glass above: ventilation at the bottom, daylight at the top. It suits bathrooms and laundries.

Specifying glass

PositionUsual choiceWhy
Doors and large screensToughened 8 – 10 mmBreaks into blunt granules, not shards
Ordinary windowsToughened 8 mmSufficient for domestic spans
BathroomsObscured or patternedDaylight with privacy
Bedrooms on a noisy streetInsulated unitSealed cavity cuts noise markedly
West-facing façadesInsulated or reflectiveReduces afternoon heat gain
About toughened glass: it is safer than float glass because it breaks into blunt granules. But toughened glass cannot be cut or drilled after tempering. Every hole and lock cut-out must be fixed before it goes through the furnace — which is why careful measurement matters and why late changes are expensive.

Choosing a finish

Colour does not affect durability where the coating is sound, so choose for the building:

  • White and off-white — bright modern houses and apartments. Light in appearance, but shows dust more readily.
  • Greys, stone grey, charcoal — the most popular choice for modern townhouses. Hides dust and sits well against white render or stone.
  • Browns — houses with a lot of timber.
  • Woodgrain — the look of timber with the durability of aluminium; common for bedroom and balcony doors.
  • Black — modern façades with slim frames. Dark finishes absorb more heat in direct sun.

One practical point: view samples outdoors, not indoors. Showroom lighting makes greys and browns read very differently from daylight.

Three common mistakes

  1. A slider on a façade exposed to driving rain, chosen because it looks neater. Water enters through the track within months.
  2. A sash too wide for its series. The weight pulls on the hinges and the door drops out of adjustment within a year or two. See dropped sashes and how they are corrected.
  3. Deciding the opening type after the structural opening is built. The opening is built to suit the door, not the reverse.

How Tropicity works

We survey on site before fixing the door type, taking account of orientation, whether a canopy exists and how the opening has been built. Tropicity runs its own aluminium and glass workshop, so clients can see profile samples, finish samples and ironmongery before fabrication — outdoors, as advised above.

See the Tropicity Windows page, the profile series explained, or completed projects.

Send your plans for advice on door types

Free preliminary estimate

Get our company profile and a budget range within 48 hours

Tell us where your project is and what you plan to build. A Tropicity engineer replies within one working day and arranges a site visit in Ho Chi Minh City and the southern provinces.

  • One contract, one estimate, one point of contact
  • A structural engineer visits your site
  • English-speaking contact; no marketing emails

Why the site address? Planning rules, building density and truck access change the price. Without the address an estimate is only a generic figure.

Please enter your name.
Please enter a valid email.
Please select a project type.
Please enter the project location.

Urgent: call +84 937 989 858

Zalo