Aluminium and glass

Series 55, 93 and 1000: choosing an aluminium profile system

Quotations for aluminium windows carry numbers — 55, 65, 93, 1000 — that are rarely explained. This article sets out what they mean and what they decide in a finished building.

What a series is

A series is a set of profiles designed to fit each other: outer frame, sash, mullion, glazing bead, together with the gasket channels and the positions where ironmongery is fixed. The number derives from the width or depth of the profile in millimetres.

  • Series are not interchangeable. Profile from one will not accept the ironmongery and gaskets of another. Choosing a series fixes the hardware set that goes with it.
  • A higher number is not better. It means a deeper or heavier profile for a different purpose. Series 93 is not an upgrade on series 55; they are for two different ways of opening a door.

Divided first by how the door opens

Casement and awning — series 55 and 65

A casement sash swings on hinges, like a conventional door; an awning window is hinged at the top.

  • Series 55 is the common system for hinged doors and windows in housing — most entrances, balcony doors and bedroom windows.
  • Series 65 has a deeper profile, used where sashes are larger or glass is heavier.

Advantage: a closed casement compresses gaskets on all four edges, so it resists wind and water far better than a slider. Opened, it clears the full opening.

Limitation: the sash needs room to swing. A narrow balcony or a tight corridor will not accommodate one.

Sliding — series 93 and 1000

Sashes run horizontally on tracks and take no space when open.

  • Series 93 is the common sliding system in housing — balcony doors, garden doors, openings between a living room and a terrace.
  • Series 1000 is a heavier sliding system for wide openings.

Advantage: no swing space, and very wide openings are possible.

Two limitations to understand before choosing: a slider is never as weathertight as a casement, because adjacent sashes always leave a gap however well it is made; and a two-sash, two-track door opens only half the opening.

The most common mistake: choosing a slider for a façade exposed to driving rain because it looks neater, then finding water entering through the track within months. Positions taking rain directly should be casement. Where a slider is unavoidable there, a canopy or a drained threshold must be designed in from the start.

Which series for which position

PositionUsual choiceWhy
Entrance, street façadeCasement, series 55 or 65Weathertight, rigid, takes multi-point locking
Bedroom and living-room windowsCasement or awning, series 55Seals well, both faces easy to clean
Narrow balconySliding, series 93No swing space needed
Wide garden openingSliding, series 93 or 1000Large clear opening
BathroomCasement, series 55, obscured glassSeals against moisture and odour
Fixed glazingMatching the adjacent doorConsistent sightlines

This is general guidance for housing. Towers, coastal sites and exposed locations need calculation rather than convention, because sash size and wind load govern.

Three questions worth asking

  1. Which series is used at each position? The answer should be specific, not "Xingfa throughout".
  2. How wide is the largest sash, and does the series carry it? Oversized sashes are the most common reason doors drop out of adjustment within a year or two.
  3. Whose ironmongery comes with this series? Each system has its own hardware set; name the manufacturer in the contract.

How Tropicity chooses

We survey each opening before fixing the series, because the choice cannot be revised once the aluminium is cut. For a typical townhouse we generally use casement series 55 for entrances and windows and sliding series 93 for balconies and garden doors, then adjust for orientation, sash width and whether a canopy exists.

See the Tropicity Windows page, how to identify genuine Xingfa, or choosing a door type for each position.

Send your opening sizes for advice

Free preliminary estimate

Get our company profile and a budget range within 48 hours

Tell us where your project is and what you plan to build. A Tropicity engineer replies within one working day and arranges a site visit in Ho Chi Minh City and the southern provinces.

  • One contract, one estimate, one point of contact
  • A structural engineer visits your site
  • English-speaking contact; no marketing emails

Why the site address? Planning rules, building density and truck access change the price. Without the address an estimate is only a generic figure.

Please enter your name.
Please enter a valid email.
Please select a project type.
Please enter the project location.

Urgent: call +84 937 989 858

Zalo